|
Video Asylum TVs, VCRs, DVD players, Home Theater systems and more. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
RE: Flatscreen mounting question. Drywall Studs-do they have any side holes?
Posted by johnvb on May 17, 2010 at 04:25:59:
Wood studs won't have any holes, metal ones do, but you still have to find them. You can cut 2" vertically wide holes horizontal across the wall, just enough to get a drill with a long bit to each stud. Screw a 4" vertically wide plywood backer board inside to secure the new drywall patch pieces.
Drywall itself is pretty easy to remove and replace, as long as you have matching paint to finish. If it has a plaster coating, matching the swirl is more difficult.
If you do have to open up the drywall to run wires, you could install (2"?) pvc conduit instead, then you can "upgrade" the cables later if need be.
But there are plastic and metal surface mounted raceways that might work, just run it on the bottom of the baseboard trim. You could then run the cable vertically in the wall, after you get under the set.
Luckily today we just need to run one or two HDMI cables to the set, instead of three cables for the video plus two audio per source. The Blue Jeans component cable I was using was the thickness of a garden hose!