 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
210.81.134.83
i have a denon 3910 dvd player and a sharpvision z9000 projector.the dvd player outputs 720p or 1080i via the dvi output.
component output is 480p.
my projector only accepts component.would it be ill-advised (or even possible) to use a dvi-to-component adapter (thus feeding the upscaled image to the projector)?
failing that bright idea, would i have to get a dvdo HD scan-like device to upscale?
tx much for any guidance
Follow Ups:
If it will, here's a way to get around the problem. The iScan HD and HD+ will not give you any benefit with that model of Sharp projector due to HDCP issues. The HD will only pass a DVI-HDCP input through the DVI output (it is not HDCP compliant, so it can't process the HDCP encrypted signal from the Denon and with pass-thru the receiving display must be HDCP compliant -- but your Sharp has no DVI input). The HD+ will process the HDCP signal, but it will only send the signal out via DVI and the receiving display must be HDCP compliant. The analog outputs, when the HD+ gets an HDCP signal, are shut off by the copy protection mandate.I believe the Sharp will take a "computer" input: that usually means analog RGB. Check out the link below for a possible solution to your problem (upscaled DVI-HDCP --> analog RGB).
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
