Home Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

A/C VOLTAGE BETWEEN ANY GROUND AND TV -Ground Loop?

With nothing hooked up to the Mitsu and power on, I put a DMM between the TV "F" or rca's and a house ground I get 57 VAC@60Hz. Switch polarity on meter - 34 VAC@60Hz
I have been tracing a ground loop hum coming from my Mitsu 55857. When any RCA's from a grounded source are hooked up one at a time the voltage drops until enough grounded RCA's are hooked up, reducing to 0 volts????
Only the Mitsubishi - 1 of 4 TV all on the same splitter, is putting out VAC.
The CATV cable will produce the same effects as the house ground. It appears the CATV is clean, as I checked it at the grounding block.
I have been butting heads with the mitsu tech for days. He claims it's a ground loop in the CATV - I say it's a floating gnd problem inside the tv or the power supply.
Any feedback would probably avoid an ulcer!
Thanks,
Mitch
Mitch


This post is made possible by the generous support of people like you and our sponsors:
  Herbie's Audio Lab  


Topic - A/C VOLTAGE BETWEEN ANY GROUND AND TV -Ground Loop? - wheezer 18:37:31 10/19/01 (7)


You can not post to an archived thread.