 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.227.205.87
After years of putting it off I got a plasma screen and started the transtion to ditigal/HDMI... and I'm not interested in buying a 5/7.1 reciever but I am finding the audio from the TV is clear but weak and I really need that center channel to enhance dialogue!
Anyone have suggestions for the cheapest/smallest decoder just to get L/R and center (sub optional)? I am kinda desperate and any suggestions are welcome!
Follow Ups:
I am pretty happy with my 2 channel stereo sound and my new plasma, and my stereo is 35 years old. Plenty of punch, dialog is strong, and my 12'' woofers go down pretty far with authority. Sure, it's not surround sound, but that's a different story.
You need a full AVR or preamp/processor to get the audio from HDMI at the moment. If you are willing to settle for digital/lossy (DD, dts) and you have a coax or optical digital audio output available, you can get an older/used one.
Oh,they're out there alright, but far from the mainstream, I agree.
Weighing in at $900 and no hard specs is...
http://www.gefen.com/kvm/dproduct.jsp?prod_id=5277
I also found this featherweight.. again - no hard specs.
http://www.cypuk.com/cyp_techpage.php?product=313&&parent
Dave
You asked specifically about "just to get L/R and center (sub optional)" and the devices you linked to are 5.1 devices, not the 3.1 device you specifically asked about.More importantly, you asked about a decoder. The second device you listed is a repeater—it simply repeats the digital input signal so that the digital signal can be sent over a longer cable run. The output is still digital. It does allow you to get a non-HDMI digital output from digital input but you're still left with digital output of the original input kind, ie if you input bitstream you will output bitstream and if you input LPCM you will output LPCM. No decoding occurs in this device. It's not what you're asking about.
While the Gefen device will decode some bitstream codecs but not all (it won't decode the new hi def codecs used with Blu-ray) and do the digital to analog conversion, it outputs a low level signal. You can't hook speakers up to it. It's still a source device. If you are going to use it for a 3 way system, you still need 3 channels of amplification and a way of balancing the speaker levels for those 3 channels plus the sub if you use one. Subs have gain controls that let you do balance a volume controlled line level output from a receiver/controller but that won't balance the volume of the line level output of the Gefen to your speaker levels so the sub output from the Gefen is useless to you if you want a sub. You're also going to need another amp to drive your centre speaker and it's going to have to have a volume control and you're going to have to adjust that control separately to the volume control of the amp driving your speakers because the Gefen has no volume control for its outputs.You need to think your sub options. The .1 channel in surround formats is a dedicated LFE channel that needs it's own amp (usually contained in the sub) but with an output that needs to be level matched to the other speakers. The gain control of the sub will let you do that but it won't adjust the volume of the sub's output when you adjust the volume of the speakers. You need a volume controlled sup output which the Gefen doesn't provide. In addition, if you want the sub to work with material that does not have a dedicated LFE channel, you need some way of inserting a crossover in your 3 channels (L/R/centre) and passing the low frequency content from them to the sub. That's not possible in the Gefen box which does not perform crossover functions.
So, unless you've got some way of matching the levels of the 3 channels so that you get equal volume for equal input from all of them at your listening position, and of controlling the volume of all 3 channels together once their levels are matched, and of providing a crossover for the sub if you need that, the Gefen device is only half or less of what you need.
The 5.1 receiver will do what you want in one box and you won't find an equivalent one box product that will do all of the things you need for 3, or 3.1 channels. You can get by with the Gefen box, a stereo amp, and another amp if you're prepared to put up with level matching your channels afresh every time you want to do a volume change but I really don't think you want to do that.
I think Kal was spot on when he said "no such thing". No one makes a 3.1 decoder/controller device.
David Aiken
Edits: 02/14/09 02/14/09
I hadn't meant to express was soliciting for solutions that provided no other outputs other than L/R and Center. That, I agreee, would be a queer device indeed.
Accordng to the manufacturer of the repeater, it does decode to analog, all for UKP120! FYI - These guys have been playing with it...
http://www.avforums.com/forums/room-acoustics-audio-video-calibration/795617-clux-11sa-hdmi-analogue-truehd-dts-hd.html
Basically, it will work as a DAC for PCM signals and for plain-vanilla DD. You would need to mate it with a player that had decoding for all the other, newer formats. Also, they seem to have had some quality control problems lately. There are 1 or 2 similar devices, such as the Gefen.Kal
Edits: 02/17/09
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
