Video Asylum

• Re: Progressive Scan Mick 16:37:22 04/03/01 (8)
  In Reply to: Re: Progressive Scan posted by Rich on April 03, 2001 at 14:11:35:

  Thanks Rich.

  This is a ton confusing! So, SVGA progressive scan is different than progressive component inputs? I'm also looking at the Panasonic CT32HX40 which has component video inputs. Is it true that not all components inputs are progressive component inputs? I'm assuming the Panasonic inputs are progressive. How do I know this for certain.

  I've already chosen my receiver and DVD player. But the TV is confusing. Can anyone point an ignoramous like me to a good paper or website that explains all this (progressive scan, line doubling, HDTV, etc.)? I'd be much appreciative! Thanks.

  Regards,
  Mick
  
  

  ---

  • If the component inputs are progressive... Rich 16:52:59 04/03/01 (7)
    In Reply to: Re: Progressive Scan posted by Mick on April 03, 2001 at 16:37:22:

    the literature will state this. Look for at least two progressive component inputs (one for DVD and one for an HDTV receiver).

    ***Can anyone point an ignoramous like me to a good paper or website that explains all this (progressive scan, line doubling, HDTV, etc.)?***

    Try:
    http://www.onecall.com/

    I recall some easy to understand explanations there.

    Also, you only seem to looking at direct view sets only. I recommend that you consider the larger 16x9 rear projection sets also. These sets have more visual impact than smaller direct view sets. The Toshiba 40H80 is quite a good set which can be found for $18-1900. No set is perfect, but once adjusted (like most sets, it's terrible out of the box), the Toshiba's picture is extremely close to as good as you're going to find.

    
    
    

    ---

    • Rich, question on RPTV's Mick 12:39:32 04/05/01 (5)
      In Reply to: If the component inputs are progressive... posted by Rich on April 03, 2001 at 16:52:59:

      I've got two rambunctious boys (ages 2 & 3). Any concerns with the RPTV screen being damaged by them? Boys will be boys and they do like to "touch" and "poke" and "prod". Thanks!

      Otherwise I think I'm going with the Panasonic CT32HX40 direct view set for $1550.
      
      

      ---

      • Some... Rich 13:31:15 04/05/01 (4)
        In Reply to: Rich, question on RPTV's posted by Mick on April 05, 2001 at 12:39:32:

        of the sets, like the Toshiba theaterwide models come with an "anti-glare" screen that protects the inner screen. Check them out. I recently bought the 40 inch model 40H80 for $1800 or so. It's 16x9 and has mostly great features and only a few stupid ones. I also have their TW65X81, a monster with a great picture. If you get one, immediately turn down the contrast to 15-20 to save your eyes and the tubes...it's set way too high.
        
        

        ---

        • Re: Some... wheezer 16:36:10 04/05/01 (3)
          In Reply to: Some... posted by Rich on April 05, 2001 at 13:31:15:

          I have a 40H80 and love it. The contrast setting are at 50%. Do you suggest cranking it down a little.
          I did not know lowering the contrast would save the guns?

          Mitch
          
          

          ---

          • Yes... Rich 18:54:48 04/05/01 (2)
            In Reply to: Re: Some... posted by wheezer on April 05, 2001 at 16:36:10:

            get yourself one of the test DVD discs from Joe Kane (Video Essentials) or Avia. Once you've set it up via the disc, your contrast setting will be much lower.
            
            

            ---

            • Re: Yes... RECOMMENDATIONS FOR A DVD??? wheezer 19:21:26 04/05/01 (1)
              In Reply to: Yes... posted by Rich on April 05, 2001 at 18:54:48:

              I'll do that, thanks. Just one problem, I havn't purchased a DVD player yet. This was my next question. I borrowed one last week and it did my TV justice...
              Recommendation welcome!
              Thanks,
              Mitch
              
              

              ---

              • Re: Yes... RECOMMENDATIONS FOR A DVD??? Mick 09:24:40 04/06/01 (0)
                In Reply to: Re: Yes... RECOMMENDATIONS FOR A DVD??? posted by wheezer on April 05, 2001 at 19:21:26:

                I'm looking at the Harman/Kardon DVD 50 progressive scan DVD. Don't know much about it since its so new.
                
                

                ---
    • Thanks, Rich... Mick 20:47:53 04/03/01 (0)
      In Reply to: If the component inputs are progressive... posted by Rich on April 03, 2001 at 16:52:59:

      I'll take a look at the Toshiba and read the website you provided. You've been a great help!

      R/ Mick
      
      

      ---
• Re: Progressive Scan Mick 16:35:26 04/03/01 (0)
  In Reply to: Re: Progressive Scan posted by Rich on April 03, 2001 at 14:11:35:

  Thanks Rich.

  This is a ton confusing! So, SVGA progressive scan is different than progressive component inputs? I'm also looking at the Panasonic CT32HX40 which has component video inputs. Is it true that not all components inputs are progressive component inputs? I'm assuming the Panasonic inputs are progressive.

  Can anyone point an ignoramous like me to a good paper or website that explains this? I'd be much appreciative! Thanks.

  Regards,
  Mick
  
  

  ---

This post is made possible by the generous support of people like you and our sponsors:

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---