 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.179.58.245
In Reply to: RE: me posted by docw on March 18, 2012 at 16:38:39
There are many ways to get surround integrated into a 2-channel system -- some good, some not so good. Re: his way (from "my" understanding of what he's suggesting), how do you control the volume of the rear speakers if the amp that's driving them gets its signal from a DVD/Blu-ray player? If it has a digital volume control, that would work, but that wouldn't be a route that I would take unless I was desperate for surround and needed a quick fix.
Do you mind used? There's a Yamaha RX-V795 receiver at videogon.com for $55 + shipping. It's cosmetically flawed (no picture though), but it has 6 preamp outputs for surround (L, R, C, RS, LS and LFE/.1). The receiver's speaker outputs could power your L/R Surround speakers (and Center speaker, should you want more than 4.1) and you could send the line level L/R channels to your current 2-channel setup. It doesn't handle the newer audio codecs of Blu-ray (DTS-HD Master Audio and Dolby TrueHD), but those codecs have either DTS Surround and/or Dolby Digital for "backup" on the disc.
Another thing: are the subs you have part of your 2-channel setup (subs feed the Mains) or are they separate? If they're part of your 2-channel setup, then you won't have an LFE/.1 channel unless you change this or add another sub.
I can recommend used stuff in the $$ - $$$$ range or new stuff in the $$$ - $$$$ range. But without a budget to work with, I'm just guessing at options that might/might not be OK for you.
Follow Ups:
Budget is under $2000 maybe including TV.
Do you mind used?
There's a Yamaha RX-V795 receiver at videogon.com for $55 + shipping. It's cosmetically flawed (no picture though), but it has 6 preamp outputs for surround (L, R, C, RS, LS and LFE/.1).
(good, will check it out)
The receiver's speaker outputs could power your L/R Surround speakers (and Center speaker, should you want more than 4.1) and
(understand)
you could send the line level L/R channels to your current 2-channel setup.
(Yamaha line level outputs?)
It doesn't handle the newer audio codecs of Blu-ray (DTS-HD Master Audio and Dolby TrueHD), but those codecs have either DTS Surround and/or Dolby Digital for "backup" on the disc.
(how would this for instance integrate into an Oppo 93?)
Another thing: are the subs you have part of your 2-channel setup (subs feed the Mains) or are they separate? If they're part of your 2-channel setup, then you won't have an LFE/.1 channel unless you change this or add another sub.
(ok, now it's disconnected, due to wiring issue, but before it was using amp to speaker wire to usual powered sub, then speaker wire to L-R)
If it's easier, I will email you. I told you I am a dummy.
"(Yamaha line level outputs?)"
Well, preamp level outputs is probably a better description. The receiver, via its speaker connections, will power your LS, RS and, if you get one, C speakers. If you don't get a C speaker, your DVD/Blu-ray player can be given this info and put the C info into the L and R channels. The L and R speaker outputs would not be hooked up on the receiver. The way you would get the L and R channels to play would be to send these two channels, via the preamp outputs on the receiver, to a line level input (an unused L/R RCA input) on your 2-channel gear.
When using the DVD/Blu-ray player, you simply select the input on your 2-channel gear that corresponds to the L/R feed from the receiver. This way, the total system volume, when watching a movie, would be controlled by the receiver's volume knob. The volume control on your 2-channel gear will need to be set at a certain level when you want to watch a movie (when there's no movie, just twist away). The easiest way to do it is to just turn the volume knob on your 2-channel gear to where you normally listen to music -- this will now be your "movie" watching setting. In order to have the proper volume coming from all of the speakers, you will calibrate the system for equal SPL from the speakers using an SPL meter and a calibration disc (don't worry, as none of this will affect your 2-channel listening).
"(how would this for instance integrate into an Oppo 93?)"
Well, one way to do it is to feed the oppo's multichannel analog out puts to the receiver's multichannel analog in puts. What channels get fed to the receiver will depend on how many speakers you end up with. For the ones you don't have (let's just say a C, SBL and SBR -- that's what oppo calls them), the oppo will be told to fold them into the appropriate channels.
Is the oppo BDP-93 part of the $2k?
If yes, why oppo?
Do you have a television picked out or are you still looking?
If you're still looking, is there a reason for 46"?
cost is arbitrary, we just paid off taxes and loans, since it took months to sell our old home, and renovate the new.
I am guessing.
Oppo 93 is often recommended as upgrade universal player and blu ray. My Pioneer DV 47 Ai, works great still, sounds at least good to very good on redbook and DVD, not stellar but inoffensive on SACD. I see that it is from 2003-4 model run, older hookup.
Need TV, I have a person who wants to help, but he had surgery and we may delay a month.
46" is for the room size and saves money.
The room is my stereo family room, sounds at least decent. Most of the evenings, my teen is practicing her violin there. Little TV time. Good!
If you want to keep the Home Theater speakers separate from the 2-channel system, newegg has a sale/coupon code for a Klipsch 5.1 speaker system (but not for large rooms) that you may be interested in -- good thru Sunday 3/25.
The sub is powered by its own 100 watt amp.
Free shipping and with the $100 coupon code its
thanks for helping me out, very good deal seemingly.
one friend has Klipsch, I haven't ever heard them at all since the K Horn days.
I was very tempted, then looking at the piano black, size etc., did not think my wife would approve.
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
