Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

Return to Video Asylum


Message Sort: Post Order or Asylum Reverse Threaded

Disney+ thru a blue ray player...?

207.6.250.143

Posted on December 24, 2020 at 08:42:18
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
I am an extreme novice at streaming, so want to make sure before proceeding with my next step for my music/HT room.
We recently got Disney+ at home. It's great! I'm getting a new PJ today (25th year present from work), and want to be sure I can use Disney+ in this room also thru the HT system. I have an old Arcam AVR300 receiver that I would prefer not to have to replace at this time.
Here's what I'm thinking.
Stream Disney+ from my cell to this blue ray player:
HDMI out from the player (thru a switch so I can also use a cable box, but that's hopefully fine and irrelevant) to the PJ (Epson 880)
Digital out from the player to the receiver for audio.
Possible? Kinks?

 

Hide full thread outline!
    ...
RE: Disney+ thru a blue ray player...?, posted on December 25, 2020 at 05:42:38
pbarach
Audiophile

Posts: 2532
Location: Ohio
Joined: June 22, 2008
Why not get a streaming device (e.g., Roku)?

 

Interesting, thanks!, posted on December 25, 2020 at 08:05:46
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
I had a feeling something exactly like this was possible. Did some reading... trying to avoid buying the wrong thing, and spending too much time at Best Buy. And it'd be great not to need to punch holes and run a 40' HDMI cable.
So I can buy a Roku, stick it in the back and stream Disney+ direct from my cell, simple enough.
But of course I want the audio coming from my HT system, not a 2" PJ speaker. And I want 3 sources total if possible. Cell and blue ray player are mandatory (cable box would be nice also).
Assuming the player I linked could stream to the PJ, it also appears it can receive a stream... (yes?, and simultaneously?), would I stream my cell to it and it out to the receiver for audio, and also the PJ for video?

 

RE: Interesting, thanks!, posted on December 26, 2020 at 07:53:50
ABliss
Audiophile

Posts: 1078
Joined: March 16, 2001
You can't stream to the Sony, it can only stream audio to other blutooth devices. If you got a new smart TV, you could probably cast video to it from your cell phone.
Other than that things can get a little complicated, if you really need Disney+, you better off finding something with the app built in. Like Roku, Apple TV. Etc.

 

OK, thank you., posted on December 26, 2020 at 09:54:01
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
We have a new smart TV in the living room, that's how this all started. Got Disney+, cool! Just operates thru the TV.
Next was to our older plasma in the bedroom, bought a Google Chromecast pod, so I watch some Disney+ from my cell there also. Wonderful.
Back to the subject at hand, the big room. I'll just use the coax digital out from a DVD player to the receiver for audio. I can do the same from a cable box I'm sure also.
But what device will work best to get video from those sources to the PJ? I know one can buy a Roku stick and get a signal from a cell direct to the PJ via the Roku stick. But that uses the PJ speaker. How to get video from a DVD/BD player and/or cable box to the PJ? Can I stream that? Maybe using an HDMI switch?
I think Disney+ might be harder, as I need something other than a cell, so how to get a Disney+ "box" down there? Not as much a concern for now... main thing is video from my rack to the PJ without hard wiring (if possible).

 

RE: Interesting, thanks!, posted on December 26, 2020 at 10:40:59
rivervalley817
Audiophile

Posts: 4593
Joined: June 15, 2020
25' is really the max you can run HDMI and that's at 720p before getting signal degradation

you could always network the smart TV's ... or 'smart' BD player

use ethernet over power to get around cable runs

TV audio out to the amps

cheap & cheerful!

with regards,


 

RE: OK, thank you., posted on December 26, 2020 at 11:04:34
ABliss
Audiophile

Posts: 1078
Joined: March 16, 2001
The Epson dose not seem to have any wireless streaming abilities, your only option is hard wire using HDMI.
I would suggest you buy a AVR to use as main distribution point. Doesn't have to be a expensive one , there are nice ones under $500, like a Marantz nr1510, I have one right now I am trying out. All your sources can go in there and one HDMI go to the projector. Its a really nice all in one preamp, processor, tuner, phone input, and to my surprise, a very good streaming app to get all internet radio.
Its a great upgrade.

 

RE: OK, thank you., posted on December 26, 2020 at 11:18:25
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002



$500 US equates to $800 CAD + taxes, that's a lot of cash to replace something that, other than these video connections, does the job fine. The Marantz unit actually has pre-outs, but I simply don't have $900 spare change for this.
There is a way to connect the PJ it seems, using a separately purchased LAN module. Would that work? And if so, from both a DVD player and a cable box?
Maybe hardwired is the best solution...

 

RE: OK, thank you., posted on December 26, 2020 at 11:25:30
rivervalley817
Audiophile

Posts: 4593
Joined: June 15, 2020
try the ethernet over power solution, use a network cable

why insist on wireless?

regards,

 

RE: Interesting, thanks!, posted on December 26, 2020 at 11:28:52
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
Sorry, 25' hardwired max? Or 25' wireless?
I am moving my rack, so 25' hard will be close. Wireless/straight line maybe 10-12'
The other stuff seems harder to me TBH, ethernet over wire, networking the smart TV... all Dutch to me.

 

Not meaning to insist on wireless, just trying to minimize work., posted on December 26, 2020 at 11:31:17
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
Just didn't want to run the HDMI cable, but I think that's exactly what I'll be doing. Thank you.

 

RE: Interesting, thanks!, posted on December 26, 2020 at 12:27:30
rivervalley817
Audiophile

Posts: 4593
Joined: June 15, 2020
25' hardwired via HDMI

that ethernet over power is a snap, one module plugs into a wall socket near your router, run a network cable from router [or cable box] > module

another module plugs into a wall socket near your projector, TV, BD player, whatever, then a network cable between them

I'm pretty sure I spotted a RJ45 input jack on the right side of your projector illustration, correct?

then you're in business! those modules MUST be plugged into the wall socket though ... no power strips etc. and they're inexpensive

regards,

 

RE: Not meaning to insist on wireless, just trying to minimize work., posted on December 26, 2020 at 13:15:00
rivervalley817
Audiophile

Posts: 4593
Joined: June 15, 2020
there's 'special' HDMI cables for long runs that will pass 4K

a little pricey but worth it

with regards,

 

Nice, posted on December 26, 2020 at 15:52:37
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
Good call on that, and thanks for the link

 

Get a switcher with digital audio output., posted on January 3, 2021 at 06:59:14
budget fi
Audiophile

Posts: 625
Location: seattle
Joined: August 8, 2004
Casting from your phone may work but you will probably get better quality from a streaming device like a Roku.

 

RE: Get a switcher with digital audio output., posted on January 3, 2021 at 18:35:31
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002






Yeah, gonna have to look into that if Disney+ becomes a must. I'm a few weeks away from anything being completed.

 

Spend a hundred bucks on a top of the line ROKU player, posted on January 9, 2021 at 14:30:00
mbnx01
Audiophile

Posts: 7727
Location: Hayden, Idaho
Joined: October 22, 2004
Make your life easy.





'A lie is halfway around the world before the truth gets its boots on'. -Mark Twain

 

RE: Spend a hundred bucks on a top of the line ROKU player, posted on January 9, 2021 at 21:51:12
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
Can you let me know a model? I looked at them, didn't see anything that would put out HDMI and audio outputs...

 

RE: Spend a hundred bucks on a top of the line ROKU player, posted on January 12, 2021 at 20:13:58
Sondek
Audiophile

Posts: 6557
Location: Fort Worth
Joined: May 17, 2000
Contributor
  Since:
April 5, 2002
I didn't have the patience to look through specs on all the Roku boxes, but I'm pretty sure they all output HDMI only.

If you need RCA audio out, you'd need an audio de-embeddeder. The de-embeddeder would take HDMI in from Roku (or other), strip (de-embed) the audio portion of the HDMI signal and pass it out via RCA, and then pass the video portion of the HDMI signal out via HDMI.

BTW, I'm pretty sure de-embedders come with other types of audio out connections too (optical, co-ax, etc.). They're not too expensive, but with the cost of the Roku, de-embedder, additional cables, it can add up.

I'd recommend the Roku Ultra. Model number 4800R.


 

RE: Spend a hundred bucks on a top of the line ROKU player, posted on January 13, 2021 at 07:06:08
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
I looked up that model just now, and have been looking into the de-embedders, thanks lots. I'm still at mudding stage, but will get this 4800R and extra unit shortly! This will be pretty much just for Disney+ for now, maybe ever, will see. Still worth it I think.

 

Nice room!, posted on January 24, 2021 at 13:08:16
budget fi
Audiophile

Posts: 625
Location: seattle
Joined: August 8, 2004
Love the room treatments. It's going to be a really setup when your done.

 

Thanks!, posted on January 24, 2021 at 19:59:12
grantv
Manufacturer

Posts: 6322
Location: B.C.
Joined: January 15, 2002
I built the room as is, apart from the new PJ, around 13 years ago IIRC. Installed the beam and columns, sound insulation, dedicated wire, etc. It was a lot of fun...

 

Page processed in 0.032 seconds.